1. Home
  2. Smart Lighting
  3. Our products and solutions
  4. Centralization and supervision platform
  5. My DL-Pak ecosystem

My DL-Pak ecosystem

Optimize the maintenance and performance of your street lighting.

TERRITORY CHALLENGES

My DL-Pak ecosystem for configuring all DL-Pak drivers:

  • Simple configuration and reading regardless of whether the driver is off or on.
  • Versatile, allowing the driver to be configured in facilities, on site in the light or in front of the lamppost base.
  • Diagnostics: the operation of the DL-Pak 70 driver.

Optimize your installation and maintenance operations

  • Place the driver for the light in the lamppost base.
  • Reduce servicing times when configuring drivers: configuration carried out when switched off.
  • Facilitate maintenance operations on LED lighting equipment: read, configure and run diagnostics on the operation of a light point.

…to ensure savings on maintenance work.

Prepare for new maintenance activities

Manage:

  • The gradual expiry of manufacturer warranties for LED lights.
  • The wide variety of drivers within the installed lighting equipment.

My DL-Pak ecosystem

LACROIX helps you to answer your daily challenges. This complete ecosystem facilitates the installation and maintenance of your street lighting equipment.

It reduces on-site servicing time and offers prompt diagnostics.

When out in the field, your technician has all the technical tools needed for the equipment installed.

Let’s discover this simple and flexible ecosystem together…

Compatible with smartphones running Android 8, iOS 13 or later versions.

Can be configured when switched off to save time

  • Configuration before installation or before on-site driver change.
  • Programming carried out in our facilities.
  • Via contactless NFC.

Compatible with smartphones running Android 8, iOS 13 or later versions.

Can be configured when switched on to adjust the lighting level in real time

  • Driver in the lamppost base.
  • Via Bluetooth with the My DL-Pak Setbox.
App Store
Google Play

Compatible with the powering range:

DL-Pak 70
DL-Pak 70L
DL-Pak 100
DL-Pak 100L
DL-Pak 200
PS-Pak

My DL-Pak application

Technical diagnostic of the DL-Pak 70

  • Driver operating time.
  • Available even when the product is out of service.
  • Related events:
    • Power supply overvoltage.
    • Number of lightning strikes, patented system.
    • Power supply undervoltage.
    • Low LED voltage/short circuit.
    • Open LED circuit.
    • Thermal protection.
  • Time stamp of the event: Lighting signal + HH:MM.
  • Up to last 7 nights recorded.
  • Results of the diagnostic shared by email.

My DL-Pak Setbox

Communication interface between the driver and smartphone via Bluetooth

  • Facilitates configuration when the driver is already in place in the lamppost base.
  • Allows the driver to be configured and read when switched on.
  • Facilitates adjusting the dimming level of the light point in real time.
  • Communicates via Bluetooth with any smartphone that has the My DL-Pak app installed.
  • Communicates via DALI with the DL-Pak driver.
  • Comes with a connection set (DALI and Wago terminals).

Technical characteristics

  • Dimensions: 101 x 63 x 31mm.
  • Battery: LiPo.
  • Standby time from fully charged to low battery: 20 days.
  • Communication range: up to 5 meters.
  • Operating temperature: -20°C to +40°C (or approximately -4°F to 104°F).
  • Storage temperature: -10°C to +30°C (or approximately 14°F to 86°F).
  • Charger connector: Micro USB 2.0.
  • Charging cable: USB 2.0 – 50cm, Micro USB Type A plug.
  • 3 LEDs to indicate different statuses (battery charge level, DALI communication, Bluetooth communication).